4
4-11
Server Setup options
Menu more than once to return to the top level for the particular Setup in which you
are working. Once at the top level, you can enter a Setup menu again, or exit without
making changes.
When you have entered the settings, you need to save the changes. You are usually
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you
choose No, your previous settings are retained. If necessary, the E-820 restarts after
you exit from the Setup menu.
Server Setup options
The Server Setup menu lets you specify system information that pertains to the E-820
and all users. To access the menu, follow the instructions on
.
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the E-820 (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
N
OTE
:
Do not use the device name (r7) as the server name. Also, if you have more than
one E-820, do not give them the same name. Windows NT 4.0 is not designed to
handle two computers with the same name in the same workgroup or domain.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM
(Hours:Minutes). The time appears on the Job Log.
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
Press button for Server Setup
