3
3-9
About Setup
Network server setup requirements
For Token Ring, Novell, and Windows NT 4.0/2000 (using TCP/IP) networks, you
must configure the network servers for printing to the E-820
before
you configure
E-820 network settings in Setup. For chapter references to information about network
server Setup, see the diagrams in
.
To configure network settings in Setup, you must have a live network connection, so
the E-820 can query the network for zones, servers, and server-based queues.
Whenever the configuration of the E-820, the copier, or the network itself changes at
your site, you can alter individual settings to correspond to the changed environment.
Changing network or port settings may require that you make changes to other Setup
options, as well.
N
OTE
:
You must configure the E-820 with the correct Windows NT/2000 domain
name. This is especially important for Windows printing, also known as SMB
printing. For E-820 systems that include the Fiery Advanced Controller Interface,
open the Start Menu>Settings>Control Panel>Network>Identification tab, and enter
the correct domain name. You must also select “Create a Computer Account in the
Domain,” and enter the user name and password of a user who can add workstations
to the specified domain. For configurations that do not include the Fiery Advanced
Controller Interface, you must add the E-820 to the domain from a networked
Windows NT 4.0/2000 server, using the Server Manager utility.
N
OTE
:
The E-820 does not support the Windows 2000 Active Directory Service.
When you use the E-820 in a Windows 2000 server environment, assign the E-820 to
a Domain or Workgroup.
