2
2-15
E-820 on a NetWare 5.x network with NDPS
Configuring a NetWare 5.x server for printing
Before you begin
The following procedures assume NDPS has been installed during NetWare 5.x
installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using the latest NetWare 5.x service pack and Novell gateway. Finally, create an NDPS
Manager. For more information, see your NetWare documentation.
In E-820 Setup, make sure you have enabled TCP/IP (see
printing (see
) on the E-820. You can ping the E-820 (see
) to
verify that TCP/IP communication is successful.
Setting up the E-820 printer driver
To install the corresponding printer driver files from the User Software CD, you
first need to create a directory forWindows NT 4.0/2000/XP or a folder for
Windows 9x/Me in the NetWare server for NDPS.
T
O
SET
UP
THE
PRINTER
DRIVER
FOR
W
INDOWS
NT 4.0/2000/XP
1.
Log on to the Novell file server as a superuser or Administrator.
2.
In the SYS:ndps\resdir\Prndrv\NT4/2000/XP directory, create a directory called Fiery.
3.
From the User Software CD, copy the contents of the
ENGLISH\INSTALRS\PS_DRVR\WIN_NT/2000/XP folder to the Fiery directory.
T
O
SET
UP
THE
PRINTER
DRIVER
FOR
W
INDOWS
9
X
/M
E
1.
Log on to the Novell file server as a superuser or Administrator.
2.
In the SYS:ndps\resdir\Prndrv\Win9x/Me directory, create a folder called Fiery.
3.
From the User Software CD, copy the contents of the
ENGLISH\INSTALRS\PS_DRVR\WIN_9x/Me folder to the Fiery directory.