5
5-33
Network Setup
Enable Windows Printing Service
—Select to enable SMB (Server Message Block),
the file and printer sharing protocol built into Windows. Enabling SMB lists the
E-820 on the network so that Windows clients can print to a particular print
connection (Hold, Print, or Direct) on the E-820 without any other networking
software. For information on setting up a Windows client for Windows printing,
see the
User Software Installation Guide
N
OTE
:
Windows (SMB) printing runs over TCP/IP, so you must configure TCP/IP
on the E-820 and any computers that use Windows printing.
The remaining options are found only in remote Setup. To change them with local
Setup, use the Network Control Panel in Windows NT 4.0.
Server Name
—Enter the server name that will appear on the network. It can, but does
not have to, be the same name as the server name assigned to the E-820 (see
).
Comment
—Enter information about the printer, up to 15 characters. These comments
are listed in the Properties of the E-820 in Network Neighborhood. Lowercase letters
are allowed in this field.
Domain or Workgroup
—Enter the workgroup or domain where the E-820 should
appear.
Ethernet WINS Server
—Enter the IP address of the Ethernet WINS name server.
Token Ring WINS Server
—Enter the IP address of the Token Ring WINS name server.
Broadcasts from SMB devices cannot be routed beyond their original network segment
without a WINS name server. Setting up the WINS name server is outside the scope of
this manual. To find out if a name server is available, contact your network
administrator.
