3
3-12
Preparing for E-820 Setup
When no jobs are processing or printing, scanning is complete within 10
minutes.When jobs are processing or printing and the E-820 hard disk has limited free
disk space available, scanning takes considerably longer.
About the E-820 default password
The E-820 is set with the Windows NT default password, “Fiery.1” for security
reasons. This is in compliance with security policies stipulated by Microsoft
Corporation. To ensure network security in your environment, the administrator must
set a password.
Changing the E-820 system password
You can change the default password from a Windows 98/Me client computer by using
the following procedure.
If you have the Fiery Advanced Controller Interface, you can change the E-820
administrator password in the same way you set the password for a Windows NT 4.0
workstation.
N
OTE
:
If you leave the password blank or specify too short of a password, you are
prompted to set a new one.
T
O
CHANGE
THE
E-820
DEFAULT
PASSWORD
FROM
WINDOWS
98/M
E
1.
Click Start in the Window 98/ME taskbar, choose Programs, and then choose
MS-DOS Prompt.
The MS-DOS Prompt window appears.
2.
At the command prompt, type the following.
For example, if you want to change to “Fiery.2”:
>net password\\E-820Name Administrator Fiery.1 Fiery.2
N
OTE
:
“E-820Name” depends on your E-820 system settings.
3.
Press Enter.
The new password “Fiery. 2” is now set.
4.
At the command prompt, type Exit.
