21 May, 1999
SERVICE RAM ADDRESSES
4-59
Service
Tables
Bit 5 and 6: PC Fax application type
Bit
6
5
Application
type
0 0 Bitware/ MS Fax (Win 95)
0
1
WinFax
4.0/7.0/8.0
1
0
Not
used
1
1
Sopwith/
LaserFax
Bit 7: Not used
8000B9(H) - User function 63 settings (SWusr_19)
Bit 0: Night timer 0: Disabled, 1: Enabled
Bits 1 to 3: Not used
Bit 4: RDS operation
0: Not acceptable
1: Acceptable for the limit specified by system switch 03
Bits 5 and 6: Not used
Bit 7: Daylight saving time
0: Disabled, 1: Enabled
8000BA(H) - User function 63 setting (SWusr_1A)
Bit 0: Not used
Bit 1: Dialing type
0: Pulse dialing (10 PPS), 1: Tone (DTMF) dialing
Bits 2 to 7: Not used
8000BB(H) - PSTN access number for loop start (SWusr_1B)
Access number Hex value to program (BCD)
0 F0
Ø
Ø
0 F0
00 00
Ø
Ø
99 99
8000BF(H) - User function 63 setting (SWusr_1F)
Bit 0: PC fax reception
0: Disabled, 1: Enabled
Bit 1 to 7: Not used
8000C0 to 8000CF(H) - G4 Parameter switches
8000D0 to 8000EF(H) - G4 Internal switches
8000F0 to 800103(H) - RTI (Max. 20 characters - ASCII) - See the following note
800104 to 800117(H) - CSI (Max. 20 characters - ASCII)
800118 to 80012B(H) - ISDN G3 CSI (Max. 20 characters - ASCII)
80012C to 80014B(H) - TTI (Max. 32 characters - ASCII) - See the following note
80014C(H) - Number of CSI characters (Hex)
80014D(H) - Number of ISDN G3 CSI characters (Hex)
Note: If the number of characters are less than the maximum (20 for RTI, 32 for
TTI), add a stop code (FF[H]) after the last character.
80014E to 80015C(H) - Service station's fax number (Service function 13)
80016C to 80017A(H) - Own fax number (PSTN) (User function 61)
80017B to 800189(H) - Own fax number (ISDN G4) (User function 61)
80018A to 800198(H) - ISDN G3 Subscriber Number 1 (User function 64)
