Ricoh AFICIO MP 6001, Руководство по устранению неисправностей

Страница: 25 / 160

Problem Cause Solution
Misfeeds occur frequently. There is a foreign object on
the finisher tray. • Remove the misfed paper. See
p.121 "Removing Jammed
Paper".
• Do not place anything on the
finisher tray. It may cause a paper
jam.
Z-Folded paper is not
properly aligned. The auxiliary tray is not set. • Set the auxiliary tray for the Finisher
Tray or Multi-Folding Unit Tray. For
details about how to add the
auxiliary tray, see p.148 "When
Z-folded Paper Is Not Properly
Aligned".
Cannot print in duplex mode. Duplex printing cannot be
done with paper set in the
bypass tray.
When using duplex printing, make
settings to use paper from a tray other
than the bypass tray.
Cannot print in duplex mode. [Apply Duplex] is set to [No]
for "Paper Type".
In [Tray Paper Settings], under "Paper
Type", set [Apply Duplex] to [Yes].
Cannot print in duplex mode. You cannot select duplex
printing if the paper type is set
to [Label Paper], [Translucent
Paper], [Preprinted Paper],
[Cardstock], [Prepunched
Paper], or [Tab Stock].
In [Tray Paper Settings], under "Paper
Type", select a paper type other than
[Label Paper], [Translucent Paper],
[Preprinted Paper], [Cardstock],
[Prepunched Paper], or [Tab Stock].
• If you cannot make copies as you want because of paper type, paper size, or paper capacity
problems, use the recommended paper. See "Recommended Paper Sizes and Types", About This
Machine
.
• Using curled paper often causes misfeeds, soiled paper edges, or slipped positions while performing
staple or stack printing. When using curled paper, take the stiffness out of the paper with your hands
to straighten out the curl, or load the paper up side down. Also, to prevent paper from curling, lay
paper on a flat surface, and do not lean it against the wall.
• p.121 "Removing Jammed Paper"
• p.148 "When Z-folded Paper Is Not Properly Aligned"
When You Have Problems Operating the Machine
23
1