Ricoh Aficio CL2000, Руководство по эксплуатации

Страница: 31 / 733

Paper and Other Media Supported by This Printer
19
2
• Any input tray can be used.
• Tray 1 can hold up to 530 sheets.
PAPER FEED UNIT Type 3000 can hold up to 530 sheets.
(Up to two units can be installed to the printer.)
The Bypass Tray can hold up to 100 sheets.
Confirm that the top of the stack is not higher than the limit mark inside
the tray.
• The Bypass Tray supports custom size paper approximately 90 to 216 mm
(3.5 to 8.5 inches) in width, and approximately 148 to 356 mm (5.8 to 14
inches) in length.
• When printing on the reverse side of plain paper that has been already
printed on, load it on the Bypass Tray with print side down, and then select
[ Plain:Dup. Back ] with the control panel or the printer driver. Only the By-
pass Tray supports this function.
❖
❖ ❖
❖
Thick Paper
• Thick paper refers to paper between 106 g/m
2
(28.2 lb. Bond) to 165 g/m
2
(90 lb. Index).
• Use the Bypass Tray and select the thick paper mode with the control panel
or printer driver. Tray 1 or Paper Feed Unit cannot be used.
• Confirm that the top of the stack is not higher than the limit mark inside
the tray.
• When printing on the reverse side of thick paper that has been already
printed on, load it on the Bypass Tray with print side down, and then select
[ Thick:Dup. Back ] with the control panel or the printer driver. Only the By-
pass Tray supports this function.
Note
❒
The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
❒
There may be noise when printing on thick paper. This is not a malfunc-
tion.
❖ ❖ ❖ ❖
Thin Paper
• Thin paper refers to paper between 60g/m
2
(16 lb.Bond) to 70g/m
2
(19
lb.Bond).
• Set the printer to Thin Paper mode using the control panel.
Reference
See p.23 “Specifying a paper type” or p.27 “Specifying a paper type for the
Bypass Tray”.
❖
❖ ❖
❖
Glossy Paper
• Glossy paper refers to paper 130 g/m2 (100 lb Text).
• Use the Bypass Tray and select glossy paper mode with the printer driver.
Tray 1 or Paper Feed Unit cannot be used.