Ricoh Aficio CL2000, Руководство по эксплуатации

Страница: 408 / 733

Operating Instructions Administrator Reference
209
AutoNet
Use the set command to configure Autonet.
Note
❒
For more information about Autonet, see p.241 “Using AutoNet” .
msh>set autonet {on|off}|msh>set autonet {on|off}
Select "on" to activate Autonet, and "off" to deactivate it.
Changing the Host Name
Use the hostname command to change the printer name.
msh> hostname [interface_name ] printer_name
*1
If you did not enter the interface name, it will be automatically set to the Ethernet interface.
*2
If you install the optional 802.11b Interface Unit, you can set the command.
*3
If you install the optional 1394 Interface Unit, you can set the command.
Note
❒
Enter the printer name using up to 47 characters.
❒
You cannot use a printer name starting with RNP or rnp.
❒
The Ethernet interface and IEEE 802.11b interface will have the same printer name.
interface name Interface to be configured
ether
Ethernet interface
*1
wlan
*2 IEEE 802.11b interface
ip1394
*3 IEEE 1394 interface