Ricoh Aficio CL2000, Руководство по эксплуатации

Страница: 167 / 733

Options
13
1
❒
Some models have only one
SDRAM Module slot. In that
case, maximum SDRAM capac-
ity is 256 MB.
Note
❒
For the controller boards that
have two SDRAM Module slots,
the following combinations are
recommended:
DDDD
Adjust the notch of the Memory
Unit to the slot, and then insert
vertically.
EEEE
Press the Memory Unit down un-
til it clicks into place.
FFFF
Align the controller board to the
top and bottom rails, and then
push in slowly until it stops.
Note
❒
When installing other options
on the controller board, do not
close the controller board, but
go to the steps for installing the
option.
Important
❒
The printer may not work prop-
erly if the controller board is not
set properly.
GGGG
Fasten the controller board to the
printer with the two screws that
you removed in step
BBBB
.
Slot
Total
memory
CN2 (back
A
A A
A
)
CN3
(front
B
B B
B
)
128 MB None 128 MB
128 MB 64 MB 192 MB
128 MB 128 MB 256 MB
128 MB 256 MB 384 MB
ZHBP110E
ZHBP120E
ZHBP070E
ZHBP010E