Ricoh Aficio CL2000, Руководство по эксплуатации

Страница: 315 / 733

Operating Instructions Administrator Reference
116
• In the
[ Printer Name ]
box, enter the name of the printer within 47 characters. The factory de-
fault name consists of “RNP” and the last 3 bytes of the MAC address on the network inter-
face board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is “RNP627DD5”. No name of 9 characters is permitted if the prefix is “RNP”. Also,
when DHCP is selected as an IP address setting, the number of characters is limited to within
47 characters.
• In the [ Comment ] box, enter any comment on printers within 31 characters.
B
Click the [ IEEE 1394 ] , and then enter the name into the [ Device Name ] box when you change
the device name for IEEE 1394 (IP over 1394) interface.
• In the
[ Device Name ]
box, enter the name of the printer within 47 characters. The factory de-
fault name consists of “RNP” and the last 5 bytes of the EUI-64 on the IEEE 1394 (IP over
1394) interface. For example, when the EUI-64 is 00:00:74:00:02:01:0A:66, the factory de-
fault name is “RNP0002010A66”. No name of 47 characters is permitted if the prefix is
“RNP”.
NetBEUI
A
Click
[ NetBEUI ]
.
B
Enter the name into the
[ Computer Name ]
box and comment into the
[ Comment ]
box.
• In the
[ Computer Name ]
box, type the name that helps you to identify printers using the Net-
BEUI protocol. The factory default name consists of “RNP” and the last 3 bytes of the MAC
address on the network interface board. For example, when the MAC address is
00:00:74:62:7D:D5, the factory default name is “RNP627DD5”. A maximum of 47 charac-
ters consisting of uppercase English letters, numeric, or symbols (except "*+,/:;<=>?[\]|. and
space) can be used. No name is permitted if the prefix is “RNP”. You must avoid the dupli-
cation of the same name on a network.