Ricoh Aficio CL2000, Руководство по эксплуатации

Страница: 397 / 733

Operating Instructions Administrator Reference
198
❖ ❖ ❖ ❖
Access type configuration
You can select the access type from those listed below.
msh> snmp number type access_type
❖
❖ ❖
❖
Protocol configuration
You should use the following command to set the protocols to active or inactive. If you set a protocol
to inactive, all access settings set to use that protocol are disabled.
msh> snmp {ip | ipx} {on | off}|{ip | ipx} {on | off}|{ip | ipx}
{on | off}
• "on" means active and "off" means inactive
To change the protocol of access settings, use the following command. However, if you disabled a
protocol with the above command, making it active here will have no effect.
msh> snmp number active {ip | ipx} {on | off}|{ip | ipx} {on |
off}|{ip | ipx} {on | off}
Access type Type of access which is permitted
read Read only
write Read and write
trap User is notified of trap messages.
no All access is denied.