Ricoh Aficio AP2700, Руководство по обслуживанию

Страница: 95 / 165

1 October, 1999 PRINTER ENGINE SERVICE MODE
4-9
Service
Tables
4.4 PRINTER ENGINE SERVICE MODE
4.4.1 SERVICE MODE MENU
Service Mode (Service Menu 2)
Title Description
Notes
(SP Mode)
A Prn EngMainte Prints the engine information
B Service regist Man/sub scan registration 1-001/002
C Regist sag Paper feed timing 1-003
D Fusing times Fusing soft start adjustment 1-107
E Fusing period Fusing soft start settings 1-108
F Fusing heat Fusing temperature adjustment 1-105/106
G LD power LD power adjustment 2-103
H Developer bias Development bias adjustment 2-201
I Developer data Development data display 2-220
J Transfer set Transfer current adjustment 2-301
K Developer init Developer initialization 2-801
L Separate volt Separation voltage adjustment 2-901
M Tailing cntrl Tailing correction (shift value) 2-906-1
N Tailing papers Tailing correction (interval) 2-906-2
O Toner supply Toner supply mode 2-921
P T sensor set Standard Vt adjustment 2-926
Q Memory all clr Memory all clear 5-801
R Free run Free run mode 5-802
S Input check Input check mode 5-803
T Output check Output check mode 5-804
U Fusing err clr SC code reset 5-810
V Test Pattern Test pattern print 5-902
W EngFirm ver up Engine board firmware update 5-932
X LoopBack test Loop-back test (not used) 5-990
Y ROM version Displays the ROM number 7-801
Z Engine S/N Serial number programming 5-811
1 Disp Eng ver Displays the engine version 9-999-9
2 A3/11x17 Count A3/DLT double count selection 5-104
3 Change PCM Mes Maintenance replacement warning 9-999-8
4 FuserCount clr Fusing counter clear
5 PCU Count clr PCU counter clear