1 October, 1999
PRINTER CONTROLLER SERVICE MODE
4-5
Service
Tables
4.3 PRINTER CONTROLLER SERVICE MODE
Service Mode Table (Service Menu 1)
Title
Description
A
BitSw#1 Set
B
BitSw#2 Set
C
BitSw#3 Set
D
BitSw#4 Set
Adjusts bit switch settings.
Note: Currently, the bit switches are not being used.
E
NVRAM Clear 1
Initializes the controller NVRAM except bit switches,
NIB settings, and log data.
F
NVRAM Clear 2
Initializes the NVRAM on the controller.
G
NVRAM Clear 3
Initializes the NVRAM on the NIB.
H
Counter Clear
Initializes all counters to zero.
I
Diag Error
Displays diagnostics error codes on the LCD.
J
Vender Maker
Selects the vender name.
K
Service Print
Prints the service summary sheet.
4.3.1 BIT SWITCH PROGRAMMING
1. Enter the SP mode and select “1.Service Menu1.”
2. Select A, B, C, or D for the desired bit switch, then press [Enter].
3. Press [Enter] in the “Bit Switch Set” menu.
4. Adjust the bit switch using the following keys.
•
[
▲
] [
▼
]: Move to the next bit.
•
[Escape]: Exit without saving changes.
•
[Enter]: Exit and save changes.
5. Press [Enter] to save changes and exit.
BIT SWITCHES
NOTE: Currently the bit switches are not being used.
