PRINTER CONTROLLER SERVICE MODE
1 October, 1999
4-6
4.3.2 NVRAM RESET
ø
CAUTION
Print the service summary report, controller configuration page, and NIB
configuration page before resetting the NVRAM(s).
DIAG. ERROR LOG AND PAPER TRAY SETTINGS RESET
This initializes the following settings in the controller NVRAM.
•
Controller diagnostics error log
•
Paper type settings for trays
•
Paper size setting for the by-pass tray
1. Enter the SP mode, and select “1. Service Menu”.
2. Select “E. NVRAM Clear 1”, then press [Enter].
3. Ensure that you have printed the service summary report, then press [Enter].
4. Press [Enter] to execute. Or press [Escape] to exit.
CONTROLLER NVRAM RESET
This initializes all the data in the controller NVRAM, except the NIB settings.
1. Enter the SP mode, and select “1. Service Menu”.
2. Select “F. NVRAM Clear 2”, then press [Enter].
3. Ensure that you have printed the service summary report and controller
configuration page, then press [Enter].
4. Press [Enter] to execute. Or press [Escape] to exit.
NIB NVRAM RESET
This initializes all the data in the NIB NVRAM.
1. Enter the SP mode, and select “1. Service Menu”.
2. Select “G. NVRAM Clear 3”, then press [Enter].
3. Ensure that you have printed the NIB configuration page, then press [Enter].
4. Press [Enter] to execute. Or press [Escape] to exit.
