1 October, 1999
PRINTER CONTROLLER SERVICE MODE
4-7
Service
Tables
COUNTER RESET
This initializes all the print counters in the controller NVRAM. Refer to the service
summary report for the counters in the controller NVRAM.
1. Enter the Printer SP mode, and select “1. Service Menu”.
2. Select “H. Counter Clear”, then press [Enter].
3. Press [Enter] to reset all the print counters.
4. Press [Enter] to execute. Or press [Escape] to exit.
NOTE: The total counter will not be cleared because the total counter data is
stored in the engine board.
4.3.3 POWER-ON DIAGNOSTICS ERROR DISPLAY
This displays the latest 8 error codes that were found during the power-on self-test.
Refer to chapter 7 (Troubleshooting) for details of the error codes.
1. Enter the SP mode, and select “1. Service Menu”.
2. Select “I. Diag Error”, then press [Enter].
3. Check the error codes on the LCD.
[
▼
] [
▲
]: Move to the previous/next code.
4. Press [Escape] to exit.
4.3.4 VENDER MAKER
This enables to select the vender name for the printer.
1. Enter the SP mode, and select “1. Service Menu”.
2. Select “K. Vender Maker”, then press [Enter].
1. Select the vender name using [
▼
] [
▲
].
2. Enter the digit using [
▼
] [
▲
].
3. Press [Enter] to execute. Or press [Escape] to exit.
4.3.5 SERVICE SUMMARY
This prints a summary of all the controller settings.
1. Enter the Printer SP mode, and select “1. Service Menu”.
2. Select “L. Service Print”, then press [Enter].
3. Press [Enter] again to print the report.
