Ricoh A230, Руководство по обслуживанию, Страница: 955 / 1134

Installation
A69
3
FAX UNIT
3-5
SM A230/A231/A232
Rev. 8/98
17. Wrap the phone line around the core [k] as shown and connect the telephone
line to the “LINE” jack at the rear of the machine.
18. Plug in the machine and turn on the main power switch.
19. Press the ‘Facsimile’ key and check the facsimile LED lights.
At this time, the display reads: SC1201 - Functional problem with the fax. Data
should be initialized.
NOTE: This is not a functional problem. The machine shows this message only
when the fax unit is first installed. If the same message appears at the
next power-on, check whether the battery switch (SW1) on the FCU
has been turned on.
20. Press “Yes” to initialize the fax unit.
21. Set up and program the items required for fax communications as shown
below. If the user function keys (F1, F2, F3, F4, and F5) need to be
programmed, attach the label.
The default settings of the user function keys are as follows:
•
F1: Start Manual Rx
•
F2: Tx Result Display
•
F3: TEL Mode
•
F4: Not programmed
•
F5: Not programmed
NOTE: Be sure to set the clock (date and time).
22. Program the serial number into the fax unit (service function 10). The serial
number can be found on the serial number label [f] (attached to the machine in
step 15).
A693I517.WMF
[k]
⇒
Rev. 8/98