Ricoh A230, Руководство по обслуживанию, Страница: 215 / 1134

SERVICE PROGRAM MODE
4-6
A230/A231/A232 SM
Accessing Copy Mode from within an SP Mode
1) Press the
N
(Interrupt) key.
2) Select the appropriate copy mode and make trial copies.
3) To return to the SP mode, press the
N
(Interrupt) key again.
Selecting the Program Number
Program numbers are composed of two or three levels.
To input the required program number, select each program level in sequence.
1. Select the 1st level program number at the ten-key pad and press the
7
key or
OK key.
NOTE: The 1st level program number can be selected using the “arrow” keys
or “Prev” key or “Next” key.
2. Select the 2nd level program number at the ten-key pad and press the
7
key
or OK key.
NOTE: The 2nd level program number can be selected using the “arrow” keys
or “Prev” key or “Next” key.
3. If there any are 3rd level programs in the SP mode, they can be selected the
same way as the 1st and 2nd level SP modes.
NOTE: The 3rd level program number can be selected using the “arrow” keys
or “Prev” key or “Next” key.
Inputting a Value or Setting for an SP Mode
1. Enter the required program mode as explained above.
2. Enter the required setting using the ten-key pad, then press the
7
key or OK
key.
NOTE: 1) If you forget to press the
7
key or OK key, the previous value
remains.
2) Change between “+” and “-“ using the
8
key before entering the
required value.
3. Exit SP mode.
[Serviceman] S P - 2 0 0 1 - X X X
SP-Mode Class 2 No. Select
Class 2 No. 001 <Charge Corona Bias Adj. >
↑
Prev.
↓
Next O K B a c k
A321M502.WMF