Ricoh A230, Руководство по обслуживанию, Страница: 754 / 1134

Serv
ic
e
Ta
b
le
s
A6
9
3
BIT SWITCHES
4-29
SM A230/A231/A232
System Switch 1F
No FUNCTION COMMENTS
0
Not used Do not change the setting.
1 Report printout after an
original jam during SAF
storage or if the SAF memory
is full
0: Enabled
1: Disabled 0: When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.
Change this bit to “1”, if the customer does not
want to have report in these cases.
Memory tx – Memory storage report
Parallel memory tx – Transmission result report
2
Not used Do not change the setting.
3 Received fax print start timing
(G3 reception)
0: After receiving each page
1: After receiving all pages
4 Received fax print start timing
(G4 reception)
0: After receiving each page
1: After receiving all pages
0: The machine prints each page immediately
after the machine receives it.
1: The machine prints the complete message
after the machine receives all the pages in the
memory.
5
6
Not used Do not change the factory settings.
7
Action when a fax SC has
occurred
0: Automatic reset
1: SC code display
0: When the fax unit detects a fax SC code other
than SC1201, SC1202, SC1207, SC1802,
SC1811 and SC1815, the fax unit automatically
resets itself.
1: When the fax unit detects any fax SC code, the
fax unit displays the SC code and stops.
Cross Reference
Fax SC codes - See “Troubleshooting”