Ricoh A230, Руководство по обслуживанию, Страница: 775 / 1134

BIT SWITCHES
4-50
A230/A231/A232 SM
Communication Switch 0D
No FUNCTION COMMENTS
0
to
7
The available memory
threshold, below which ringing
detection (and therefore
reception into memory) is
disabled 00 to FF (Hex), unit = 2 kbytes
(e.g., 0C(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is
below this threshold, the machine cannot receive
any fax messages.
If this setting is kept at 0, the machine will detect
ringing signals and go into receive mode even if
there is no memory available. This will result in
communication failure.
Communication Switch 0E
No FUNCTION COMMENTS
0
to
7
Minimum interval between
automatic dialing attempts 06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine
waits before it dials the next destination.
Communication Switch 0F
No FUNCTION COMMENTS
0
to
7
Minimum number of times that
a destination will dialed when
TRD is being used 01 - FF (Hex) times
Communication Switch 10
No FUNCTION COMMENTS
0
to
7
Memory transmission:
Maximum number of dialing
attempts to the same
destination 01 - FF (Hex) times
Communication Switch 11 - Not used (do not change the settings.)
Communication Switch 12
No FUNCTION COMMENTS
0
to
7
Memory transmission: Interval
between dialing attempts to
the same destination 01 - FF (Hex) minutes
Communication Switch 13 - Not used (do not change the settings.)