manualshive.com logo in svg

Ricoh A230, Руководство по обслуживанию, Страница: 378 / 1134

Поделиться
Скачать
Ricoh A230 Скачать руководство пользователя страница 378

ROM HISTORY

7-32

A230/A231/A232

SM

Description of Modification

Firmware Level

Serial Number

Firmware

Version

Corrects the following:

“ 

•

    C” jam occurs, opening the front

or right door can clear the jam
message display.

After modification

The “C” jams can only be
cleared by opening the right
door.

Note:
As part of the modification, one
right door interlock switch has
been added and one front door
interlock switch has been
removed.
In addition, SP5957 has been
added to allow usage of either
the old or new interlock
switches.
If using the old interlock switch,
please set the SP5957 to 0.
 If using the new switch, please
set SP5957 to 1.  If SP5957 is
not set properly, the ‘door open’
Panel display may not function
properly and the toner may not
be fed properly after toner bottle
replacement.

•

 

FALSE TONER OVERFLOW

CONDITION: When the sensor
detects Toner, the “Near Full”
message is immediately
displayed.  After the Toner
signal has been on

 

for 1000

copies, the machine shuts off.
Once the Toner signal
disappears, the “Near Full”
message is no longer displayed
and the counter is reset.

After modification:

After the toner signal has been
on for 500 consecutive copies,
the “Near Full” message is
displayed.  After the “Near Full”
message has been displayed for
1000 copies, the machine shuts
off.  Once the toner signal
disappears, the counter is reset.

Continued…

A2325113 R

N/A

14.1

Rev. 12/99

⇒

Содержание A230















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов