Ricoh A230, Руководство по обслуживанию, Страница: 533 / 1134

ROM HISTORY
16-25
1000
-Shee
t
Finisher
A68
1
SM A230/A231/A232
4.7 ROM HISTORY
A681 Firmware Modification History (1000 Sheet Finisher)
Description of Modification Level Prod. Date Ver.
Corrects the following:
•
Paper jams due to an error in the vertical
movement of the tray.
A6815103K NA K
Corrects the following:
•
Jams that occur when the door is opened
during a staple job.
•
After the power is turned on, the copier
reaches ready status even though the shift
tray lower limit sensor is on (and the stack is
full). A jam occurs if a copy job is started.
A6815103J NA J
Corrects the following:
•
The mainframe locks up during jam recovery.
The frequency of occurrence is extremely low.
•
The user cancels the staple job when there is
only one sheet in the staple tray and the sheet
is automatically removed from the tray. A
paper jam occurs when the next sheet is fed
for stapling.
A6815103H NA H
Corrects the following:
•
The jam detection timing has been changed so
the A681 can also be used with the A265 and
A267. This change has no effect on the A232
series.
A6815103G NA G
Corrects the following:
•
Stapled paper did not stack straight.
A6815103F NA F
Corrects the following:
•
Paper rolling on the shift tray.
A6815103E NA E
Rev. 01/2000
⇒