Ricoh A230, Руководство по обслуживанию, Страница: 840 / 1134

T
rouble
-
s
hooting
ERROR CODES
6-9
SM A230/A231/A232
Code Meaning Suggested Cause/Action
9-31 HDD control error
9-32 HDD read error
9-33 HDD fatal error
•
Turn both power switches off and on.
•
Replace the hard disk.
21-00 BiCU communication error Check the cable connection between BiCU and
FCU.
Replace the BiCU or FCU.
21-01 BiCU turned off
•
Check if the LED (+5V supply) on the BiCU is
lit or not.
Check the cable connection between BiCU and
FCU.
Replace the BiCU or FCU.
21-02 BiCU handshake error
•
Check the cable connection between BiCU and
FCU.
Replace the BiCU or FCU.
22-00 Original length exceeded
the maximum scan length
•
Divide the original into a few pages.
Check the resolution used for scanning. Lower
the scan resolution if possible.
Add optional page memory.
22-01 Memory overflow while
receiving
•
Wait for the files in the queue to be sent.
Delete unnecessary files from memory.
Transfer the substitute reception files to an
another fax machine, if the machine’s printer is
busy or out of order.
Add an optional SAF memory card or hard
disk.
22-02 Tx or rx job stalled due to
line disconnection.
•
Tx or rx job does not finish even after line
connection.
•
Restart the machine.
22-03
Cache memory for HDD
has become full while
receiving.
•
Writing data to the HDD takes too long.
•
Check the cable connection to the HDD. If
problem persists, replace the HDD.
23-00 HDD data read timeout
•
Reading data from the HDD takes too long.
•
Check the cable connection to the HDD. If
problem persists, replace the HDD.