Ricoh A230, Руководство по обслуживанию, Страница: 772 / 1134

Serv
ic
e
Ta
b
le
s
A6
9
3
BIT SWITCHES
4-47
SM A230/A231/A232
Communication Switch 07
No FUNCTION COMMENTS
0 Fallback from G4 to G3 if the
other terminal is not a G4
terminal
0: Disabled 1: Enabled Also see system switch 0A bit 7.
Refer to the ISDN G4 option service manual (G4
Internal Switches 17, 18, 1A, 1B, and 1C) for the
CPS code set (Cause Value set) to determine G4
to G3 fallback.
1
Not used Do not change the setting.
2 Use of the date and time
provided from the network for
the CIL
0: Disabled 1: Enabled 0: The date and time programmed in the receiving
terminal is used in the CIL.
1: The date and time informed in the document
layer from the remote terminal (through the
network) is used in the CIL.
3
to
5
Not used Do not change the settings.
6
Usage the ISDN line of an
outer line or extension line
0:Outer line
1:Extension line When use the ISDN extension line, program the
extension access number (communication switch
08), then change this bit to 1.
7
Not used Do not change the setting.
Communication Switch 08
No FUNCTION COMMENTS
0
to
7
Program the ISDN extension
access number When use the ISDN extension line, program the
extension access number, then change
communication switch 07 bit 6 to 1.
The value can be between 00 and 99 (BCD).
If the value is set to FF (BCD), it means that no
number is programmed.
Do not use any setting other than listed above.
Communication Switch 09 - Not used (do not change the settings)