Ricoh A230, Руководство по обслуживанию, Страница: 265 / 1134

SERVICE PROGRAM MODE
4-56
A230/A231/A232 SM
4.2.5 OUTPUT CHECK
NOTE: Motors keep turning in this mode regardless of upper or lower limit sensor
signals. To prevent mechanical or electrical damage, do not keep an
electrical component on for a long time.
Main Machine Output Check (SP5-804)
1. Access SP mode 5-804.
2. Select the SP number that corresponds to the component you wish to check.
3. Press “1”, then press
7
to check that component.
4. Press “0” to interrupt the test.
5. If you wish to check another component, press the “Next” or “Prev.” Key.
No. Description No. Description
1 Upper Paper Feed Clutch 35 Relay Clutch (PTU)
2 Lower Paper Feed Clutch 36 Relay Clutch
3 Upper Paper Feed Clutch (PTU) 37 Not used
4 Lower Paper Feed Clutch (PTU) 38 Relay Clutch (LCT)
5 Paper Feed Clutch (By-pass) 39 Registration Clutch
6 Paper Feed Clutch (LCT) 40 Not used
7 ~ 12 Not used 41 Exit Junction Gate Solenoid
(Interchange Unit)
13 Pick-up Solenoid (By-pass) 42 Duplex Junction Gate Solenoid
(Interchange Unit)
14 Pick-up Solenoid (LCT) 43, 44 Not used
15, 16 Not used 45 Inverter Gate Solenoid (Duplex)
17 Upper Transport Motor (Finishers) 46 Not used
18 Lower Transport Motor (3,000-
sheet Finisher only) 47 Junction Gate Solenoid
(Bridge Unit)
19 Shift Tray Exit Motor (3,000-sheet
Finisher), Exit Motor (1,000-sheet
Finisher) 48, 49 Not used
20 Staple Hammer Motor (Finishers) 50 Tray Junction Gate Solenoid
(3,000-sheet Finisher only)
21 Punch Motor (Punch Unit) 51 Stapler Junction Gate Solenoid
(Finishers)
22 ~ 24 Not used 52 Positioning Roller Solenoid
(Finishers)
25 LCT Motor (LCT) 53 ~ 55 Not used
26 Tray Motor (PTU) 56 Toner Supply Motor
27 Not used 57 Transfer Belt Clutch
28 Main Motor 58 ~ 61 Not used
29 Transport Motor (Duplex) 62 Quenching Lamp
30 Inverter Motor – Reverse (Duplex) 63 Charge Roller Bias
31 Inverter Motor – Forward (Duplex) 64 ~ 66 Not used
32 ~ 34 Not used 67 Development Bias
68 Not used 86 ~ 89 Not used