Ricoh A230, Руководство по обслуживанию, Страница: 217 / 1134

SERVICE PROGRAM MODE
4-8
A230/A231/A232 SM
Mode No.
Class 1
and 2
Class 3
Function Settings
1-002 5 * Side-to-Side
Registration
(Duplex) Adjusts the printing side-to-side
registration from the duplex tray using
the trimming area pattern (SP2-902-3,
No.10). +9 ~ -9
0.1 mm/step
+ 0.0 mm
Use the
●
/
✽
key to toggle b
and - before entering the value.
The specification is 2
±
1.5 mm. See
"Replacement and Adjustment - Copy
Adjustments" for details on SP1-002.
6 * Side-to-Side
Registration
(By-pass feed) Adjusts the printing side-to-side
registration from the by-pass feed table
using the trimming area pattern (SP2-
902-3, No.10). +9 ~ -9
0.1 mm/step
+ 3.0 mm
Use the
●
/
✽
key to toggle b
and - before entering the value.
The specification is 2
±
1.5 mm.
7 * Side-to-Side
Registration
(LCT) Adjusts the printing side-to-side
registration from the LCT using the
trimming area pattern (SP2-902-3,
No.10). +9 ~ -9
0.1 mm/step
+ 1.5 mm
Use the
●
/
✽
key to toggle b
and - before entering the value.
The specification is 2
±
1.5 mm.
1-003 * 1 *
Paper Feed
Timing
(Paper Feed
Trays) +9 ~ -9
1 mm/step
+ 0 mm
2 * Paper Feed
Timing
(Duplex)
Adjusts the relay clutch timing at
registration. The relay clutch timing
determines the amount of paper buckle
at registration. (A +ve setting leads to
more buckling.)
3 Paper Feed
Timing
(By-pass)
1-007 By-pass Feed
Paper Size
Display Displays the paper width sensor data
for the by-pass feed table.
1-103 * Fusing Idling Selects whether fusing idling is done or
not. 0: Off
1: On
Normally disabled in this machine.
However, if fusing is incomplete on the
1st and 2nd copies, switch it on. This
may occur if the room is cold.
Refer to “Detailed Section Descriptions
- Fusing Temperature Control” for more
details.
1-104 * Fusing
Temperature
Control Selects the fusing temperature control
mode. 0: On/Off
1: Phase