Ricoh A230, Руководство по обслуживанию, Страница: 239 / 1134

SERVICE PROGRAM MODE
4-30
A230/A231/A232 SM
Mode No.
Class 1
and 2
Class 3
Function Settings
4-910 1 Data Compression Selects whether simple data
compression is done or not. 0: Yes
1: No
Do not change the value.
2 Data Compression
Threshold Selects the threshold level for image
compression.
Do not change the value. 0 ~ 255
1/step
8
3 Data Compression
– ABS Through Selects whether the ABS function is
done or not.
0: Yes
1: No
Do not change the value.
4-911* 1 HDD Setting
(Media Test) Checks for bad sectors on the hard disk
that develop during machine use. Press
“1” to start. This takes 4 minutes. 1: Start
This SP mode should be done when an
abnormal image is printed. There is no
need to do this at installation as the
hard disk firmware already contains bad
sector information, and damage is not
likely to occur during transportation.
Bad sectors detected with this SP mode
will be stored in the NVRAM with the
bad sector data copied across from the
firmware.
If the machine detects over 50 bad
sectors, SC361 will be generated. At
this time, use SP4-911-2.
2 HDD Setting
(Formatting) Formats the hard disk. This takes 4
minutes. Press “1” to start.
Do not turn off the main power
switch during this process. 1: Start
3* HDD Setting
(Spindle Control) Decides the disk drive motor (spindle motor) stop timing.
0: Enabled
The hard disk stops in low power mode. The first copy
after returning to standby will take longer.
1: Disabled
The hard disk keeps going in low power mode.
6 HDD Setting
(Bad Sector
Information Reset) Resets the bad sector information
which is stored in the NVRAM. Press
“1” to start. 1: Start
This SP should be performed when the
hard disk is replaced.
7 Displays the number of bad sectors
there are on the hard disk. HDD Setting
(Bad Sector
Display)
If the machine detects over 50 bad
sectors, SC361 will be generated. At
this time, use SP4-911-2.
Total: 0
Copy: 0
Printer: 0
AF (Archive
File): 0