Beijing RichAuto S&T Co., Ltd.
46
2)
Press “
” to enter the “scan mill set”, it includes: Scan type, Scan Width, Scan Height,
Cutter Tool Diameter, Scan Depth, Z Step and T Ratio.
3)
Press “
” to move the cursor and press”
” to selcect scan type (
anticlockwise
or C.W.
) and modify parameters, press “
” to save all the changes.
5.6.7 Calculate work time
Calculate the total processing time according to the system “work speed”. After reading the
processing file, the screen displays processing time, different work speed correspond to different
processing time.
5.6.8 Find break No.
During processing, if accidentally tool damaged and user hasn’t saved the break point, stop
working and replace cutter tool. After that, user can manually move X, Y axis to the nearest point
where the cutter was broken (recommend to move a little further), press
“
”+“
”to start advanced work, move cursor to “Find break no.”, then press
“
” to enter in. After guide and reading code, the system prompts:
Press “
” to start processing, press “
” key, the screen shows the current position
line number as below:
Query
Press enter key to continue
working from searching
position, press other key only
show the line number!
Info
35422 is the break line number
of this file.
