Beijing RichAuto S&T Co., Ltd.
40
(From breakpoint 1 to 8), press “
” move the cursor and select, and then press “
”
to save, system automatically move to workpiece origin. If the user needs continue processing
from the breakpoint, could press the shortcut key“
”, the system will restore the
machining from corresponding breakpoint.
E.g.: To restore from breakpoint 1, could press shortcut key “
”, the screen shows the file
name of on breakpoint 1 as below,
The G code file “Testfile.cnc” for example, it has totally 6705 lines g codes. Press “
” the
screen displays breakpoint line No. after pre-reading.
Press“
” popup machining parameters list, then revise as needed and press “
”,
the system will resume processing from breakpoint 1.
However, if user needs to go backwards
from this breakpoint, shall press “
”, then the screen shows as below,
Break list
1n Testfile.cnc
2: Empty
3: Empty
…
8: Empty
Line No.
30
Input (new line) No.:
File has
6705
25
Total line count
Input a new line No.
