Beijing RichAuto S&T Co., Ltd.
43
Note: If user needs to manual control in array work, just change the setting of
“Interval
(unit:ms)”
into a negative number.
5.6.2 Resume work (breakpoint processing)
Steps as below
：
Press“
” to move cursor to resume work, press “
” to enter the breakpoint list,
then move the cursor to the breakpoint position as needed, press “
”, the system will
resume work from the chosen breakpoint.
If you want to return back towards from the
breakpoint position, should press “
” to input new line number and then press “
”,
system will start processing from the new line. For specification operation steps can review the
contents in
5.5.3Breakpoint processing &power failure recover.
5.6.3 Tool changing
It means manually loading or unloading the cutting tool in a certain position of the machine tool.
Press “
” to get into the setup, after changing the tool bit press “
” to move back
to the previous location.
5.6.4 Part work
Park work means user can select a start line and stop line from G code, which can realize
machining a part of G codes from the processing file. The operate steps are as follows
：
1) Press“
” to enter the setup, press “
” to move the cursor and select a file and
wait for the file reading process;
2) Press“
” when the system ask to input start line no. and stop line no..Then the screen
