Beijing RichAuto S&T Co., Ltd.
35
Double press “
”, the screen will displays two rows of arrows which defaults all
arrows are downwards “↓”.
Upper arrows represent input signals: the former 4 numbers 0, 1, 2, 3
corresponding to X zero, Y zero, Z zero and tool setting. The 4th,5th,6thare driver alarm, hard
limit, emergency stop and foot switch (cycle switch) input signals.
Manual trigger the signal switch by pressing “
”, the corresponding
arrow flip up
indicates that the signal is normal
. If not, user should check its switch, wiring and 50 pins cable.
Manual test input ports
Manual test output ports
To trigger X1 (X axis HOME switch), the corresponding arrow will flip, means X1 signal is
normal. X2 to X8 detecting is in the same way.
Note
: Do not confuse with “Voltage setup”.
5.3.4 Manual switching coordinate system
Including
machine coordinate system
and
work coordinate system
.
Machine coordinate system is a fixed position, the origin point of machine coordinate is
always a fixed position relative to the machine; its coordinate value is called mechanical values,
the origin of coordinate is the origin of the machine or called reference point. So, at any time, a
point in space can be uniquely determined by a mechanical coordinate system. Because of
reference point is the calculation basis of machine coordinates movement, all of those operations
such as power on the machine or abnormal release and so on have to return to the reference
point which is refers to return machine ZERO.
Work coordinate system used more greatly than other coordinates system in processing.
Usually, in processing, we describe a processing position is always relative to a certain point on
the workpiece, whereas the workpiece on the machine tool's position relative to the mechanical
origin is often change, so it is necessary to introduce a set of more convenient coordinate system
during processing, that is work coordinate system. The origin of work coordinate system is a fixed
point relative to the workpiece, but it is floating relative to the machine coordinate origin.
RichAuto-B15
provides 1 machine coordinate system and 8 work coordinate systems. Press
“
” + “
” can switch the machine coordinate system and work coordinate system;
press “
” + “Number button 1-9” can switch among different work coordinate systems.
Schematic diagram of coordinate system:
