Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
4
．
Menu Description
4.1 Menu category
According to menu function, RichAuto system menu is divided into
param setup, file operation, system setup, factory setup, version view
menu has multiple submenus.
4.2 Menu details
4.2.1 User parameter setup
“User parameter setup” menu is used to set the parameters about machine
hardware. It is set by machine producer
machine hardware, electronic device settings have not changed, user also should not
change the parameters under this menu. If user need to modify parameters
consult the equipment manufacturer and modif
technical engineer.
User parameter setup structure diagram
1.
Machine setup
(1)
Work type:
a. Submenu “WrkPos/Neg”,
from the tailstock to four
User param setup
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
Menu Description
4.1 Menu category
According to menu function, RichAuto system menu is divided into 5 main menus
operation, system setup, factory setup, version view
submenus.
Menu details
ser parameter setup
“User parameter setup” menu is used to set the parameters about machine
hardware. It is set by machine producer according to device type. If parameters such as
machine hardware, electronic device settings have not changed, user also should not
change the parameters under this menu. If user need to modify parameters
consult the equipment manufacturer and modify with the help of the manufacturers
User parameter setup structure diagram
Submenu “WrkPos/Neg”, “work positive” refers to machining processing direction is
from the tailstock to four-jaw chuck. “Work negative” is the opposite of “work positive”
User param setup
Machine setup
Feed list
Spiral work list
Loop proc setup
Work speed (engraving)
Lathe work speed
Origin offset (workpiece origin offset)
Safe height
Auto speed ratio
Fall down scale
Stop state
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn
18
5 main menus:
user
operation, system setup, factory setup, version view
, each main
“User parameter setup” menu is used to set the parameters about machine
according to device type. If parameters such as
machine hardware, electronic device settings have not changed, user also should not
change the parameters under this menu. If user need to modify parameters
，
please
y with the help of the manufacturers
refers to machining processing direction is
jaw chuck. “Work negative” is the opposite of “work positive”
