Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
(4) Processing file error. Check processing file, try to download the correct processing file
to U disk or handle internal.
(5) There is something wrong with the lines
Replace the lines.
4. Return to the machine
body
Analysis and solutions
：
Three press the "menu" button
check whether the detection signal is normal
(1) The origin detection switch is damaged.
(2) The distance of the origin detection switch detection sheet beyond the detection range
of the switch, adjust the position of the test piece.
(3) The origin detection switch to the interface board
check the connections.
(4) The interface board is broken.
(5) 50-pin data cable is broken.
5. Back to the machine origin
Analysis and solutions
：
(1) The origin detection switch types do not match with the definition of the corresponding
level. Modify the level.(Normally open type corresponds to a level defined the direction of
the arrow down, normally closed type corresponds to the
(2) The origin detection switch is damaged.
(3) The origin detection switch connects interface board not well.Refresh the line to
determine the wiring is correct.
(4) Too much interference, resulting in the illusion of the detection switch has been
triggered. Recalibrate the whole circuit.
(5) The interface board is broken.
(6) 50-pin data cable is broken.
6. Abnormally working when
from the processing file
Analysis and solutions
：
(1) The program disorder.
(2) External interference is too
weak current, "GND" of inverter separat
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
Check processing file, try to download the correct processing file
to U disk or handle internal.
There is something wrong with the lines connecting Z axis motor and motor driver.
machine origin
，
the spindle keep going and crashes the machine
the "menu" button
，
self test the input signal (origin detection switch signal),
whether the detection signal is normal or not.
origin detection switch is damaged. Replace a new one.
The distance of the origin detection switch detection sheet beyond the detection range
of the switch, adjust the position of the test piece.
The origin detection switch to the interface board wiring aging or loosening.
broken. Depot Repair.
pin data cable is broken. Replace it with a new data line.
. Back to the machine origin
，
machine move to the reverse direction
The origin detection switch types do not match with the definition of the corresponding
Modify the level.(Normally open type corresponds to a level defined the direction of
the arrow down, normally closed type corresponds to the level defined arrow up).
The origin detection switch is damaged. Replace a new one.
The origin detection switch connects interface board not well.Refresh the line to
the wiring is correct.
Too much interference, resulting in the illusion of the detection switch has been
the whole circuit.
The interface board is broken. Depot repair.
pin data cable is broken. Replace the data line.
. Abnormally working when processing file or the actual working
External interference is too large. Refresh connection.(separate strong
weak current, "GND" of inverter separated from the other components ).
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn
46
Check processing file, try to download the correct processing file
Z axis motor and motor driver.
spindle keep going and crashes the machine
(origin detection switch signal),
The distance of the origin detection switch detection sheet beyond the detection range
wiring aging or loosening. Again
reverse direction
The origin detection switch types do not match with the definition of the corresponding
Modify the level.(Normally open type corresponds to a level defined the direction of
level defined arrow up).
The origin detection switch connects interface board not well.Refresh the line to
Too much interference, resulting in the illusion of the detection switch has been
working is different
Refresh connection.(separate strong electric from
