RichAuto A122, Руководство пользователя

Страница: 23 / 55

Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
direction. To modify the direction by pressing “
selection list (The following submenu
b. “4 axis”, means engraving mode. T
after choosing this submenu.
(2) RoughS (rough machining value setting)
The “RoughS” is to control the cutting depth ratio of crude knife and fine knife. For
instance, the value 0.7, refers to cutting depth ratio of crude knife(X knife) is 70%, so
the fine knife (Z knife) is 30%.
Modify method : press“
finish the setting.
(3) Offset (cutter spacing)
Refers to the spacing distance of
Modify method : press“
finish the setting.
(4) AtchStrt(attachment start position)
The start coordinate of the paste wood strip (calculate from the work piece origin), the
value can be achieved from the processing file, its unit is
Modify method : press“
finish the setting.
(5) AtchLgth(attached wood strip length)
WorkType
ScwPos
ScwNeg
4 axis
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
the direction by pressing “ ”, entering into the direction
following submenu “ScwPos” and “ScwNeg” are same argument).
means engraving mode. The screen main interface will change as below
after choosing this submenu.
(rough machining value setting)
The “RoughS” is to control the cutting depth ratio of crude knife and fine knife. For
instance, the value 0.7, refers to cutting depth ratio of crude knife(X knife) is 70%, so
the fine knife (Z knife) is 30%.
: press“ ”to input a specific value, and then press“
spacing)
Refers to the spacing distance of the two cutters along Y axis direction.
: press“ ”to input a specific value, and then press“
start position)
The start coordinate of the paste wood strip (calculate from the work piece origin), the
value can be achieved from the processing file, its unit is
mm .
: press“ ”to input a specific value, and then press“
AtchLgth(attached wood strip length)
WorkType
Wrkeg
ScwPos
ScwNeg
WrkPos
WorkType WZ 0.000 MANU
WY 0.000 F 8
WA 0.000 F SP
Continue
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn 19
”, entering into the direction
are same argument).
change as below
The “RoughS” is to control the cutting depth ratio of crude knife and fine knife. For
instance, the value 0.7, refers to cutting depth ratio of crude knife(X knife) is 70%, so
ue, and then press“ ”to
two cutters along Y axis direction.
”to input a specific value, and then press“ ”to
The start coordinate of the paste wood strip (calculate from the work piece origin), the
”to input a specific value, and then press“ ”to
0.000 MANU
0.000 F 8
0.000 F SP