RichAuto A122, Руководство пользователя

Страница: 42 / 55

Add: 5F, No.4 building, No 4. Yard, life Rd, life science park,
Tel
：
010-53275118 Fax
：
Press “ ”three times, the screen will display
downwards “ ↓ ”.
Upper arrows represent input signal
zero, Y zero, Z zero and tool setting gauge.
alarm, hard limit and emergency stop input signal
Manual trigger the corresponding signal switch by pressing “
arrow flip up indicates that
core cable and so on.
Bottom row represents output signal
spindle forward on/off
、
inversion output signal .
signal.
Press “ ” button can change the arrow direction, so it can control the output of
corresponding port. For example, press “
position of 0, it is equivalent to start the spindle. Press“
downwards, the spindle stop
 5.4 Automatic processing operation
Auto processing refers to the system runs the file in U disk or in
according to the instruction
must set the machine tool parameters and all of the system parameters correctly.
Auto processing steps:
5.4.1 Set workpiece origin
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park, Beiqing St., Changping dist.
：
010-53275110/53275111 Web site
：
www.richnc.com.cn
”three times, the screen will display two rows of arrows which are
Upper arrows represent input signals: the former 4 numbers 0, 1, 2,3 corresponding to X
zero, Y zero, Z zero and tool setting gauge. Number 4, 5, 6, 7 corresponding to driver
alarm, hard limit and emergency stop input signal and foot switch.
Manual trigger the corresponding signal switch by pressing “ ”, the corresponding
up indicates that the signal is normal. If not, pls check the switch,
output signals: the former 4 numbers 0,1,2,3 corresponding to
、
signal to be defined 1, signal to be defined 2, spindle
No.4, 5 corresponding to alarm lamp
、
running lamp output
” button can change the arrow direction, so it can control the output of
corresponding port. For example, press “ ”to flip the arrow upwards under
0, it is equivalent to start the spindle. Press“ ” again, the arrow flip
stop
Automatic processing operation
Auto processing refers to the system runs the file in U disk or inner storage space
according to the instructions, it also called file processing. Before auto processing,
must set the machine tool parameters and all of the system parameters correctly.
workpiece origin
1X 0.000 MAUN
1Y 0.000 F2
1Z 0.000 L SP
Continue
Beijing RichAuto S&T Co., Ltd
ist. Beijing, China
www.richnc.com.cn 38
two rows of arrows which are all
corresponding to X
corresponding to driver
the corresponding
pls check the switch, wiring, 50
0,1,2,3 corresponding to
1, signal to be defined 2, spindle
running lamp output
” button can change the arrow direction, so it can control the output of
”to flip the arrow upwards under the
gain, the arrow flip
storage space
, it also called file processing. Before auto processing, user
must set the machine tool parameters and all of the system parameters correctly.