Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 15 / 80

Installation
© Rice Lake Weighing Systems ● All Rights Reserved 9
2.4.8 Ethernet
The 680 features Ethernet TCP/IP 10Base-T/100Base-TX communication using the J8 connector ( Section 2.5 on page 10 ),
and can support two simultaneous connections, one as a server, the other as a client.
Through an Ethernet network, software applications can communicate with the 680 using the EDP command set (
Section 7.0
on page 44 ), or data can be streamed continuously from the 680, or printed on demand.
The Ethernet port supports both DHCP and manual configuration of settings such as the IP and netmask. In addition, the TCP
Port number, and the Default Gateway can be configured using the Ethernet sub-menu of the Ports setup menu. For more
information on configuring the Ethernet port see Section 4.4.4.3 on page 30 .
Physical connection to the 680 Ethernet port can be made directly from a PC to the 680 (AdHoc Network), or through a network
router or switch. The port supports auto-sensing MDI/MDIX cable configuration, allowing either straight-through or crossover
cables to be used. See Table 2-7 for the pin assignments for the J8 connector.
When looking into the enclosure from the backside of the indicator, pin 1 of the J8 connector is at the bottom.
See Table 2-8 and Table 2-9 for the pin assignments when connecting a RJ45 Ethernet cable to the J8 connector. There are
two Ethernet wire standards (T568A and T568B). If the type of cable is unknown, use the wiring option in Table 2-8 . The auto-
sensing feature of the Ethernet port allows either of the wiring options to work. Trim the unused wires to get them out of the way.
Connector Pin Signal
J8 1 TX+
2 TX-
3 RX+
4 RX-
Table 2-7. J8 Pin Assignments (Ethernet)
RJ45 Cable
Pin
Wire Color
(T568A)
Wire Diagram
(T568A)
10Base-T Signal
100Base-TX Signal
J8 Connector
Pin
1
White/Green
T 1
2
Green
Transmit- 2
3
White/Orange
3
4
Blue
Unused NA
5
White/Blue
Unused NA
6
Orange
Receive- 4
7
White/Brown
Unused NA
8
Brown
Unused NA
Table 2-8. Ethernet Cable Pin Assignments for T568A
RJ45 Pin #
Wire Color
(T568B)
Wire Diagram
(T568B)
10Base-T Signal
100Base-TX Signal J8 Pin #
1
White/Orange
T 1
2
Orange
Transmit- 2
3
White/Green
3
4
Blue
Unused NA
5
White/Blue
Unused NA
6
Green
Receive- 4
7
White/Brown
Unused NA
8
Brown
Unused NA
Table 2-9. Ethernet Cable Pin Assignments for T568B
Note