Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 41 / 80

Configuration
© Rice Lake Weighing Systems ● All Rights Reserved 35
4.4.8 Setup – Setpoints Menu
Figure 4-16. Setup – Setpoints Menu
Parameter Description
stptcfg
Setpoint Configuration – Access to configuration parameters and settings for up to eight setpoints; Settings: SETPT 1-8
KIND
– Setpoint Kind: Settings: OFF (default), GROSS, NET, -GROSS, -NET, ACCUM, POSREL, NEGREL, PCTREL,
PAUSE, DELAY, WAITSS, COUNTER, AUTOJOG, COZ, INMOTON, INRANGE, BATCHPR, TIMER,
CONCUR, TOD, ALWAYS, NEVER
batchng
Batching – Batch sequence runs when set to AUTO or MANUAL; Settings:
OFF (default)
AUTO – Allows the batch sequence to repeat automatically once it has been started
MANUAL – Requires a BATSTRT input/command to run the batch sequence
Table 4-15. Setup – Setpoints Menu Parameters
Setup
setpnt
batchng
setpt 1 Setpt 2-8
stptcfg
kind
off gross net -gross -net accum posrel negrel pctrel
pause delay waitss counter autojog coz inmoton inrange batchpr
timer concur tod always never
Section 4.4.8.1 on page 36
Section 4.4.8.3
on page 36
Section 4.4.8.1 on page 36
Section 4.4.8.3
on page 36
Section 4.4.8.2 on page 36 Section 4.4.8.3 on page 36
Section 4.4.8.3 on page 36
Section 4.4.8.2
on page 36
Section 4.4.8.3
on page 36
Section 4.4.8.2
on page 36