Rice Lake Revolution 680 Synergy Plus, Техническое руководство

Страница: 50 / 80

680 Synergy Plus – Digital Weight Indicator
44 Visit our website www.RiceLake.com
7.0 EDP Commands
The 680 indicator can be controlled by a personal computer connected to one of the indicator communication ports. Control is
provided by a set of commands which can simulate front panel key press functions, return and change setup parameters, and
perform reporting functions. The commands provide the capability to print configuration data or to save data to an attached
personal computer. This section describes the EDP command set and procedures for saving and transferring data using the
communication ports. The EDP command set is divided into several groups.
When the indicator processes a command, it either responds with a value (for reporting commands, or when querying
parameter settings), or with the message OK . The OK response verifies the command was received and has been executed. If
the command is unrecognized, the indicator responds with ?? invalid command . If the command cannot be executed in the
current mode, the indicator responds with ?? invalid mode . If the command is recognized, but the value is out of range or the
invalid type, the indicator responds with ?? followed by the type and the range.
7.1 Key Press Commands
Key press serial commands simulate pressing keys on the front panel of the indicator. These commands can be used in both
setup and weigh mode. Several of the commands serve as pseudo keys, providing functions which are not represented by a
key on the front panel.
For example, to enter a 15 lb tare weight using serial commands:
1. Type K1 and press
Enter
(or
Return
).
2. Type K5 and press
Enter
.
3. Type KTARE and press
Enter
.
Command Function
KZERO In weigh mode, this command acts like pressing the Zero key
KGROSSNET In weigh mode, this command acts like pressing the Gross/Net key
KGROSS Displays Gross mode (pseudo key)
KNET Displays Net mode (pseudo key)
KTARE In weigh mode, this command acts like pressing the Tare key
KUNITS In weigh mode, this command acts like pressing the Units key
KPRIM Displays primary units (pseudo key)
KSEC Displays secondary units (pseudo key)
KPRINT In weigh mode, this command acts like pressing the Print key
KPRINTACCUM Prints the accumulated weight
KDISPACCUM Displays the accumulator value
KDISPTARE Displays the tare value
KCLR In weigh mode, this command acts like pressing the Clear key
KCLRCN Clears consecutive number
KCLRTAR Clears the tare from the system (pseudo key)
KLEFT In setup mode, this command moves Left in the menu
KRIGHT In setup mode, this command moves Right in the menu
KUP In setup mode, this command moves Up in the menu
KDOWN In setup mode, this command moves Down in the menu
KEXIT In setup mode, this command exits to weigh mode
KSAVE In setup mode, this command saves the current configuration
KSAVEEXIT In setup mode, this command saves the current configuration and exits to weigh mode
KTIME Displays time
KDATE Displays date
KTIMEDATE Displays time and date
KCLRACCUM Clears the accumulator
Table 7-1. Key Press Commands