680 Synergy Plus – Digital Weight Indicator
32
Visit our website
4.4.5.1 Industrial Settings Menu
The industrial settings menu (
indset
) only displays if the regulation parameter (
regula
) is set to industrial (
indust
).
Figure 4-13. Industrial Settings Menu
time
Time – Allows setting of the time format and the separator character
TIMEFMT – Time Format;
Settings:
12HOUR
(default), 24HOUR
TIMESEP – Time Separator;
Settings:
COLON
(default), COMMA, DOT
locale
Location Gravity Compensation – Enables gravity compensation;
Settings:
OFF
(default), ON
latorig
Latitude of Origin – Original latitude (to nearest degree) for gravity compensation;
Enter value: 0–90,
45
(default)
eleorig
Elevation of Origin – Original elevation (in meters) for gravity compensation;
Enter value: -9999–9999,
345
(default)
latdest
Latitude of Destination – Destination latitude (to nearest degree) for gravity compensation;
Enter value: 0–90,
45
(default)
eledest
Elevation of Destination – Destination elevation (in meters) for gravity compensation;
Enter value: -9999–9999,
345
(default)
Parameter
Description
audagcy
Audit Agency – Audit trail display agency format;
Settings:
NTEP
(default), CANADA, NONE, OIML
snapsht
Snap Shot – Display or scale weight source;
Settings:
DISPLAY
(default), SCALE
htare
Hold Tare – Allow tare in display hold;
Settings:
NO
(default), YES
ztare
Zero Tare – Remove tare on zero;
Settings:
NO
(default), YES
ktare
Keyed Tare – Always allow keyed tare;
Settings:
YES
(default), NO
mtare
Multiple Tare – Replaces existing tare when the tare key is pressed;
Setti
ngs:
REPLACE
(default), REMOVE, NOTHING
ntare
Negative/Zero Tare – Allow negative or zero tare;
Settings:
NO
(default), YES
ctare
Clear Tare/Accumulator – Allow clear key to clear tare/accumulator;
Settings:
YES
(default), NO
negtotl
Negative Total – Allow total scale to display negative value;
Settings:
NO
(default), YES
Prntmot
Print In Motion – Allow print while in motion;
Settings:
NO
(default), YES
printpt
Print Preset Tare – Add preset tare (PT) to keyed tare print;
Settings:
YES
(default), NO
prnthld
Print Hold – Print during display hold;
Settings:
NO
(default), YES
holdwgh
Hold Weighment – Allow weighment during display hold;
Settings:
NO
(default), YES
motowgh
Motion Weighment – Allow weighment in motion;
Settings:
NO
(default), YES
ovrbase
Overload Base – Zero base for overload calculation;
Setting
s:
CALIB
(default), SCALE
rtare
Round Button Tare – Round pushbutton tare to the nearest display division;
Settings:
NO
(default), YES
rktare
Round Keyed Tare – Round keyed tare to the nearest display division;
Settings:
NO
(default), YES
azt net
AZT On Net Value – Perform auto zero tracking on net value;
Settings:
NO
(default), YES
mctare
Manual Clear Tare – Allow manual clearing of the tare value;
Settings:
YES
(default), NO
taremot
Tare In Motion – Allow tare in motion;
Settings:
NO
(default), YES
zeromot
Zero In Motion – Allow scale to be zeroed while in motion;
Settings:
NO
(default), YES
uldwgh
Underload Weight – Underload weight value in display divisions;
Enter value: 1–9999999,
20
(default)
Table 4-12. Industrial Settings Menu Parameters
Parameter
Description
Table 4-11. Setup – Program Menu Parameters (Continued)
Setup
Progrm
indset
AUDAGcY
SNaPSHT
HTARE
NEGTOTl
PRnTMOT
PRinTPT
RKTARE
AZT NET
MCTARE
ZTARE
KTARE
PRnTHLD
HoLDWGH
TAReMOT
ZERoMOT
MTARE
MOToWGH
NTARE
CTARE
OVRBASe
RTARE
ULDWGH
Содержание Revolution 680 Synergy Plus
Страница 1: ...680 Synergy Plus Digital Weight Indicator Technical Manual August 14 2019 PN 192627 Rev A...
Страница 79: ......
