24
Chapter 3
Software
Credential 2
Place the cursor into the Credential 2 field and type the Password ‘UserPassword’
Since the Credential 2’ checkbox is checked, the field fill-in character is the ‘*’. Deselecting this check
box before filling in the field will allow you to view the actual password. This may be useful if the
Credential field is not a password, but some other non-secure information.
Now, add the {ENTER] keystroke by placing the cursor into the ‘Post Keystroke’ field and using the
‘Add Enter’ button located beneath the ‘Add Tab’ button.
The resulting screen should look exactly like the following:
All that is left to do is to ‘Write’ the Credentials 1 and 2 to the contactless card sitting on the reader.
This is done by pressing the ‘Write Credential’ button.
