RVF 327, 327 S, 330, 330 S
ex no. 1200
Operation of the vacuum filling
machine
Version 1.5
page 47 of 144
4.4.2
Turning on the Vacuum filling machine
After the Vacuum filling machine is connected to the power supply through the main switch, it
requires usually a minute in order to start up the controls. During the first 30 seconds, the
screen is mostly black and after 30 seconds or so, the following start up mask appears,
which moves on to “ready for operation” after starting up the controls are completed.
Start up mask
Ready for operation
Attention:
The Vacuum filling machine will not turn on if the upper section is open. If the Vacuum
filling machine is turned on, and the upper section is opened, then the controls auto-
matically shuts down the Vacuum filling machine and goes over to the operational
readiness. The machine key "I" will then be grey.