RVF 327, 327 S, 330, 330 S
ex no. 1200
Operation of the vacuum filling
machine
page 46 of 144
Version 1.5
The controls support the following operating modes:
Straight filling
The Vacuum filling machine produces sausage meat un-
interrupted, as long as the knee lever switch is depressed
(pay attention to individual-continuous portioning switch
over!).
Portioning
The Vacuum filling machine produces, depending upon pro-
gram data, a certain portion of sausage meat and then gives
the possible attached twisting- and clip machine the order to
close the sausage. As long as the knee lever is depressed,
this process will be repeated (pay attention to single and con-
tinued portioning!).
Twisting (off)
The Vacuum filling machine produces, depending upon pro-
gram data, a certain portion of sausage meat and then gives
the possible attached twisting- and clip machine the order to
close the sausage. (Twisting off). As long as the knee lever is
depressed, this process will be repeated (pay attention to
single and continued portioning!) If a certain amount of pieces
has been selected, the machine fills the selected amount of
sausages and then stops automatically (Interruption of the
filling process is possible by operating the knee lever)
Constant pressure opera-
tion
Using a pressure sensor, which will be inserted into the dis-
charge pipe of the vacuum filling machine, the control device
regulates the pressure of the sausage meat at the discharge
end according to selected pressure value of the knee lever.
(for adaptive devices)
Secondary machine con-
trolling
A second vacuum filling machine or a valve can be controlled
when filling, portioning and twisting, so that during filling an
additional function can be controlled. The discharge of the
second filling machine can be activated with a delay at the
beginning of the filling as well as at the end of the portioning it
can be deactivated earlier. Furthermore, one can choose if
this activity should occur during the first portion or after the
second sausage meat.
