Renkforce RF2000 v2 BSS Скачать руководство пользователя страница 87

Страница: 87 / 110

20. Firmware update with the Arduino

IDE

The firmware of the main PCB is updated frequently to optimise the properties of the 3D printer. The currently installed firmware version of your

printer is briefly displayed in the upper display line after switching on the printer.

The update with the Arduino

IDE enables you to change the firmware before installation and to adjust it on demand.

Attention! All changes are made at your own risk! We assume no liability for this!

Download of the firmware

Firmware updates can be found in the current download package "

RF2000v2_SD_Vx.x.zip

" that you can download from the product

page. On this, note the chapter "12. a) Download and unpacking of the software/firmware package".

You can also download the firmware from

https://github.com/RF1000/Repetier-Firmware

. The latest firmware updates for the

RF1000 as well as for the RF2000 and the RF2000 v2 are provided there. You can choose between two "

Branches

Master

" is the last released version of the firmware.

Development

" is the version of the firmware that is currently subject to development.

• First, select the desired "

Branch

", click the button "

Clone or download

" and the "

Download ZIP

", in order to download the firmware. The

downloaded archive always contains the firmware for the RF1000, RF2000 and RF2000 v2. Unpack the ZIP file.

Update process

The printer must be connected to the USB interface of the computer and must not be connected to any other software (for

Repetier-Host, e.g. click "Disconnect"). The USB driver must be installed as well.

Use only Arduino

version 1.6.5 under Windows

. This is also included in the latest version of the download package.

Alternatively, download the latest version of the 1.6.5. The first link leads to the main page. You can find the download there in "

PRE-

VIOUS RELEASES

". The second (ZIP-file) and third links (installable EXE-file) lead directly to the respective download page. Then

you only need to click download.

https://www.arduino.cc/en/Main/Software

https://www.arduino.cc/download_handler.php?f=/arduino-1.6.5-r5-windows.zip

https://www.arduino.cc/download_handler.php?f=/arduino-1.6.5-r5-windows.exe

Install or unpack the downloaded Arduino

version on your computer.

If you want to update with a MAC, use Arduino

version 1.6.0 instead of version 1.6.5.

Содержание RF2000 v2 BSS















































































































Результаты поиска

Содержание RF2000 v2 BSS

Отзывы:

Бренды по названию

Популярные бренды

Renkforce RF2000 v2 BSS, Руководство по эксплуатации

Результаты поиска

Содержание RF2000 v2 BSS

Отзывы:

Бренды по названию

Популярные бренды