manualshive.com logo in svg

Renesas M16C/60 Series, Руководство пользователя

На нашем сайте Вы можете бесплатно скачать пользовательское руководство для серии продуктов Renesas M16C/60. Наши мануалы помогут Вам разобраться в функциях и возможностях данной продукции. Скачать можно на manualshive.com.

Поделиться
Скачать
background image

C - 8

2.00

 Feb 07, 2011

76, 79

Table 7.7 Procedures for Setting Voltage Monitor 1 Interrupt/Reset Related Bits and 
Table 7.8 Procedure for Setting Voltage Monitor 2 Interrupt/Reset Related Bits: 

• Changed the sequence of the steps.
• Added note 3.

77, 80

Figure 7.6 Voltage Monitor 1 Interrupt/Reset Operation Example and 
Figure 7.8 Voltage Monitor 2 Interrupt/Reset Operation Example:
Changed note 1 from “VCC1 

≥

 2.7 V” to “recommended operation condition VCC1”.

Clock Generator

83

Figure 8.1 System Clock Generator:

• Changed the logic symbol connected to 

NMI

 and PM24.

• Changed a part of the main clock. 

86

8.2.2 “System Clock Control Register 0 (CM0)”: 
Changed the second bullet of the CM06 bit explanation.

88

8.2.3 System Clock Control Register 1 (CM1): Changed the explanations for bits CM10 and CM15.

94

8.2.7 Processor Mode Register 2 (PM2): Added the last line in the PM21 bit explanation.

97

8.3.4 Sub Clock (fC): Integrated step (4) into step (3).

98

8.4.1 CPU Clock and BCLK: Changed the sixth line up from the bottom.

106

8.9.3 CPU Clock: Added the technical update number.

107

8.9.5 PLL Frequency Synthesizer: Added.

Power Control

110

9.2.1 Flash Memory Control Register 0 (FMR0): Changed the FMR01 and FMSTP bit explanations.

111

9.2.2 Flash Memory Control Register 2 (FMR2): Changed the FMR23 bit explanation.

113

9.3.1.2 PLL Operating Mode: Deleted “high-speed mode”.

114

9.3.1.6 Low Power Mode: Deleted the last 3 lines in the previous version.

115

Table 9.2 Clocks in Normal Operating Mode: 
Deleted notes 2 to 6 in the previous version and newly added note 2.

118

Figure 9.2 Clock Divide Transition: 

• Divided high-speed mode and medium-speed mode.
• Deleted “g” and “h” from 125 kHz on-chip oscillator mode.

120

9.3.3 Wait Mode: Changed the last 2 lines.

120

9.3.3.2 Entering Wait Mode: Added line 5 and below.

121

9.3.3.4 Exiting Wait Mode: Deleted the 2 paragraphs below the table.

121

Table 9.6 Resets and Interrupts to Exit Wait Mode and Conditions for Use: 

• Changed the conditions for use in the Voltage monitor 1, Voltage monitor 2 row.
• Divided the Voltage monitor 1 reset, Voltage monitor 2 reset row from the Voltage monitor 0 reset 

row and changed the conditions for use.

122

9.3.4.1 Entering Stop Mode: Added line 8 and below.

123

9.3.4.3 Exiting Stop Mode: Deleted the second paragraph in the previous version.

123

Table 9.8 Resets and Interrupts to Exit Stop Mode and Conditions for Use: 
Changed the conditions for use in the Voltage monitor 0 reset row.

124

Figure 9.3 Stop and Restart of the Flash Memory: 

• Changed the ranges of Stop Procedure and Restart Procedure.
• Deleted note 4.

125

9.4.2.1 Slow Read Mode: Added lines 3 and 4.

125, 126

Figure 9.4 Setting and Canceling Slow Read Mode and Figure 9.5 Setting and Canceling Low 
Current Consumption Read Mode: Deleted “Restore the CPU clock” from the canceling procedure.

127

9.5.2 A/D Converter: Deleted the explanation for when A/D conversion is performed.

128

9.6.1 CPU Clock: Added line 2.

128

9.6.2 Wait Mode: 

• Added lines 4 and 5 to the first bullet.
• Deleted second bullet in the previous version and added the second to fifth bullets.

128

9.6.3 Stop Mode: 

• Changed “until main clock oscillation is stabilized” in first bullet to “for 20 fOCO-S cycles or more”.
• Added lines 6 and 7 to the third bullet.
• Deleted fourth bullet in the previous version and added fourth to eighth bullets.

129

9.6.4 Low Current Consumption Read Mode: Added the third bullet.

REVISION HISTORY

M16C/64A Group Hardware Manual

Rev.

Date

Description

Page

Summary

Содержание M16C/60 Series






















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M16C/60 Series

Zhone 6211 Quick Installation Instructions preview
6211
Бренд: Zhone Страницы: 1
ebm-papst VBH0630CTTRS Operating Instructions Manual preview
VBH0630CTTRS
Бренд: ebm-papst Страницы: 16
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Бренд: Parker Страницы: 107
Lanner NCA-1040 User Manual preview
NCA-1040
Бренд: Lanner Страницы: 59
HighPoint RocketCache 3240X8 User Manual preview
RocketCache 3240X8
Бренд: HighPoint Страницы: 17
3Com 3C433279A Release Note preview
3C433279A
Бренд: 3Com Страницы: 12
Echo LAYLA 3G Owner'S Manual preview
LAYLA 3G
Бренд: Echo Страницы: 21
Paradyne Hotwire 5620 RTU Installation Instructions Manual preview
Hotwire 5620 RTU
Бренд: Paradyne Страницы: 20
ZALMAN CNPS9800 MAX User Manual preview
CNPS9800 MAX
Бренд: ZALMAN Страницы: 32
Beckhoff CU8210-D001-0200 Manual preview
CU8210-D001-0200
Бренд: Beckhoff Страницы: 25
Matrix Switch Corporation MSC-CP32X1E Product Manual preview
MSC-CP32X1E
Бренд: Matrix Switch Corporation Страницы: 48
Enterasys Matrix 6H303-48 Hardware Installation Manual preview
Matrix 6H303-48
Бренд: Enterasys Страницы: 90
Fujitsu BS2000 SE Series Quick Manual preview
BS2000 SE Series
Бренд: Fujitsu Страницы: 43
Fujitsu BS2000 SE Series Basic Operating Manual preview
BS2000 SE Series
Бренд: Fujitsu Страницы: 93
Fujitsu anywAiR Quick Installation Manual preview
anywAiR
Бренд: Fujitsu Страницы: 5
Pro-Log STD 7000 User Manual preview
STD 7000
Бренд: Pro-Log Страницы: 59
Sunrise CONNECT BOX 3 Quick Install Manual preview
CONNECT BOX 3
Бренд: Sunrise Страницы: 2
Roland RSS Digital Snake S-4000H Specification preview
RSS Digital Snake S-4000H
Бренд: Roland Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды