Renault ALASKAN 2017 Скачать руководство пользователя страница 40

Страница: 40 / 340

CHILD RESTRAINT INSTALLATION

USING ISOFIX

WARNING

•

Attach ISOFIX and i-Size child restraints only

at the specified locations. For the ISOFIX

lower anchor locations, see “ISOFIX lower an-

chor point locations” earlier in this section. If

a child restraint is not secured properly, your

child could be seriously injured or killed in an

accident.

•

Do not install child restraints that require the

use of a top tether strap to seating positions

that do not have a top tether anchor.

•

Do not secure a child restraint in the centre

rear seating position using the ISOFIX lower

anchors. The child restraint will not be se-

cured properly.

•

Inspect the lower anchors by inserting your

fingers into the lower anchor area and feeling

to make sure there are no obstructions over

the ISOFIX anchors, such as seat belt web-

bing or seat cushion material. The child re-

straint will not be secured properly if the

ISOFIX anchors are obstructed.

•

Child restraint anchorages are designed to

withstand only those loads imposed by cor-

rectly fitted child restraints. Under no circum-

stance are they to be used for adult seat belts,

harnesses or for attaching other items or

equipment to the vehicle. Doing so could

damage the child restraint anchorages. The

child restraint will not be properly installed

using the damaged anchorage, and a child

could be seriously injured or killed in a colli-

sion.

Installation on rear outboard seats

Front-facing child restraints:
Be sure to follow the child restraint manufacturer’s

instructions for the proper use of your child restraint.

Follow these steps to install a front-facing child re-

straint on the second row outboard seats using

ISOFIX:

1. Position the child restraint on the seat

➀

2. Remove the head restraint

➁

to obtain the cor-

rect child restraint fit.
Once removed, store the head restraint in a se-

cure place.

Be sure to reinstall the head restraint when-

ever the child restraint is removed (see “Head

restraints” earlier in this section).

3. Check that the back of the child restraint is

placed firmly against the vehicle seatback

➂

4. Secure the child restraint anchor attachments to

the ISOFIX lower anchors

➃

NPA1406

Steps 1, and 2

NIC2807

Steps 3, and 4

NIC2808

Step 5

1-22 Safety — seats, seat belts and supplemental restraint system

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды

Renault ALASKAN 2017, Руководство водителя

Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды