Renault ALASKAN 2017 Скачать руководство пользователя страница 156

Страница: 156 / 340

Heater operation

Heating:
This mode is used to direct heated air from the foot

outlets.
1. Push the air recirculation

button for normal

heating. (The indicator light will turn off.)

2. Turn the air flow control dial to the

position.

3. Turn the fan speed control

dial to the de-

sired position.

4. Turn the temperature control dial to the desired

position between the middle and the hot (right)

position.

Ventilation:
This mode directs outside air from the side and

centre vents.
1. Push the air recirculation

button. (The indi-

cator light will turn off.)

2. Turn the air flow control dial to the

position.

3. Turn the fan speed control

dial to the de-

sired position.

4. Turn the temperature control dial to the desired

position.

Defrosting or defogging:
This mode directs the air to the defogger outlets to

defrost/defog the windows.
1. Turn the air flow control dial to the

position.

2. Push the air recirculation

button. (The indi-

cator light will turn off.)

3. Turn the fan speed control

dial to the de-

sired position.

4. Turn the temperature control dial to the desired

position between the middle and the hot (right)

position.

•

To remove frost from the windscreen quickly,

turn the temperature control dial to the maximum

position and the fan speed control

dial to

the maximum position.

•

If it is difficult to defog the windscreen, turn the

A/C button on.

Bi-level heating:
This mode directs cool air from the side and centre

vents and warm air from the foot outlets. When the

temperature control dial is turned to the maximum

hot or cool position, the air between the vents and

the foot outlets is the same temperature.
1. Push the air recirculation

button. (The indi-

cator light will turn off.)

2. Turn the air flow control dial to the

position.

3. Turn the fan speed control

dial to the de-

sired position.

4. Turn the temperature control dial to the desired

position.

Heating and defogging:
This mode heats the interior and defogs the win-

dows.
1. Push the air recirculation

button. (The indi-

cator light will turn off.)

2. Turn the air flow control dial to the

position.

3. Turn the fan speed control dial to the desired

position.

4. Turn the temperature control dial to the maximum

hot (right) position.

Air conditioner operation

The air conditioner system should be operated for

approximately 10 minutes at least once a month.

This helps prevent damage to the air conditioner

system due to the lack of lubrication.
Cooling:
This mode is used to cool and dehumidify the air.
1. Push the air recirculation

button. (The indi-

cator light will turn off.)

2. Turn the air flow control dial to the

position.

3. Turn the fan speed control dial to the desired

position.

4. Push the A/C button on. (The A/C indicator light

will illuminate.)

5. Turn the temperature control dial to the desired

position between the middle and the cool (left)

position.

4-24 Display screen, heater and air conditioner, and audio system

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Renault ALASKAN 2017, Руководство водителя, Страница: 156 / 340

Результаты поиска

Содержание ALASKAN 2017

Отзывы: