Renault ALASKAN 2017 Скачать руководство пользователя страница 192

Страница: 192 / 340

•

For assistance with your mobile phone inte-

gration, please visit your local approved

dealer.

➀

Phone button

➁

<MENU> or <ENTER> button (rotate and

push to select)

➂

(Back) button

➃

Phone book quick search button A-Z

BLUETOOTH® settings

Enter the phone setup menu via the

(phone)

button, select the [Bluetooth] key, and then check if

the bluetooth is set to on (default setting is on, push

the <ENTER> button if not).

To setup the Bluetooth system to pair (connect or

lowing procedure.

To pair a device, use the [Scan device] key or the

[Pair device] key.

Up to 5 different Bluetooth devices can be con-

nected. However, only one device can be used at a

time. If 5 different Bluetooth registered devices are

registered, a new device can only replace one of the

5 existing paired devices. Use [Del. device] key to

delete one of the existing paired devices. For de-

tails, see “[Del. device]” later in this section.
When successfully paired a notification message

will be displayed, then the audio system display will

return to the current audio source display. During

connection the following status icons will be dis-

played (top left of the display): Signal strength

(

), Battery status* (

) and Bluetooth “ON”

(

*: If the low battery message comes on, the Blue-

tooth® device must be recharged soon.

The pairing procedure and operation may vary ac-

cording to device type and compatibility. See the

Bluetooth® owner’s manual for further details.
NOTE

•

For device details, see your audio/mobile

phone Owner’s Manual.

•

For assistance with the Bluetooth® audio/

mobile phone integration, please visit your lo-

cal approved dealer.

•

A maximum of 5 Bluetooth devices can be

paired with the system.

To set up the Bluetooth system with a device the

following items are available:

•

[Scan devices]
Shows all available visible Bluetooth devices and

initializes Bluetooth connection from the audio

unit.

•

[Pair device]
Initializes Bluetooth connection from the mobile

device.

•

[Sel. device]
Paired Bluetooth devices are listed and can be

selected for connection.

•

[Del. device]
A registered Bluetooth device can be deleted.

•

[Bluetooth]
If this setting is turned off, the connection be-

tween the Bluetooth devices and the in-vehicle

Bluetooth module will be cancelled.

NAA1582

4-60 Display screen, heater and air conditioner, and audio system

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды

Renault ALASKAN 2017, Руководство водителя

Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды