Renault ALASKAN 2017 Скачать руководство пользователя страница 139

Страница: 139 / 340

A Camera

When the shift lever is shifted into the R (Reverse)

position, the monitor display shows the view to the

rear of the vehicle.
The system is designed as an aid to the driver in

detecting large stationary objects to help avoid dam-

aging the vehicle. The system will not detect small

objects below the bumper and may not detect ob-

jects close to the bumper or on the ground.

WARNING

Failure to follow the warnings and instructions

for proper use of the reversing camera could re-

sult in serious injury or death.

•

The reversing camera is a convenience but it

is not a substitute for proper reversing. Al-

ways turn and look out the windows, and

check mirrors to be sure that it is safe to move

before operating the vehicle. Always reverse

slowly.

•

The system is designed as an aid to the driver

in showing large stationary objects directly

behind the vehicle, to help avoid damaging

the vehicle.

•

The system cannot completely eliminate blind

spots and may not show every object.

•

Underneath the bumper and the corner areas

of the bumper cannot be viewed on the re-

versing camera because of its monitoring

range limitation. The system will not show

small objects below the bumper, and may not

show objects close to the bumper or on the

ground.

•

Objects viewed in the reversing camera differ

from actual distance because a wide-angle

lens is used.

•

Objects in the reversing camera will appear

visually opposite than when viewed in the rear

view and outside mirrors

•

Make sure that the tailgate is securely closed

when reversing.

•

Do not put anything on the reversing camera.

The reversing camera is installed at the top of

the tailgate.

•

When washing the vehicle with high pressure

water, be sure not to spray it around the cam-

era. Otherwise, water may enter the camera

unit causing water condensation on the lens,

a malfunction, fire or an electric shock.

•

Do not strike the camera. It is a precision in-

strument. Otherwise, it may malfunction or

cause damage resulting in a fire or an electric

shock.

CAUTION
Do not scratch the camera lens when cleaning

dirt or snow from the lens.

NIC3088

Reversing Camera displays

REVERSING CAMERA (where fitted)

Display screen, heater and air conditioner, and audio system

4-7

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды

Renault ALASKAN 2017, Руководство водителя

Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды