Renault ALASKAN 2017 Скачать руководство пользователя страница 243

Страница: 243 / 340

Resuming at preset speed:
Push and release the <RES/+> switch

A .

The vehicle will resume the last set cruising speed

when the vehicle speed is over 40 km/h (25 MPH).

Changing a cruising speed

Use any one of the following methods to change the

cruising speed.
Resetting to lower speed:
Use any one of the following methods to reset to a

lower speed.

•

Slow the vehicle as normal using the footbrake

pedal.

When the vehicle reaches the desired cruising

speed, push and release the <SET/—> switch

B downwards.

The new set speed value will be displayed in the

top of the vehicle information display.

•

Push and hold the <SET/—> switch

B to de-

crease the set speed in steps of 5 km/h (3 MPH).

When the vehicle information display reaches

the desired speed, release the <SET/—> switch

for the setting to take effect.

•

Quickly push and release the <SET/—> switch

B . This will reduce the vehicle speed by about

1 km/h (1 MPH).

The new set speed value will be displayed in the

top of the vehicle information display.

Resetting to higher speed:
Use any one of the following methods to reset to a

higher speed.

•

Depress the accelerator pedal. When the ve-

hicle reaches the desired speed, push and re-

lease the <SET/—> switch

B .

•

Push and hold the <RES/+> switch

A to in-

crease the set speed in steps of 5 km/h (3 MPH).

When the vehicle information display reaches

the desired speed, release the <RES/+> switch

for the setting to take effect.

•

Quickly push and release the <RES/+> switch

A . This will increase the vehicle speed by about

1 km/h (1 MPH).

The new set speed value will be displayed in the

top of the vehicle information display.

Resuming at preset speed:
Push and release the <RES/+> switch

A .

The vehicle will resume the last set cruising speed

when the vehicle speed is over 40 km/h (25 MPH).

Passing another vehicle

Depress the accelerator pedal to accelerate. After

releasing the accelerator pedal, the vehicle will re-

turn to the previously set speed.

The set speed value

➄

will flash until the vehicle

returns to the previously set speed.

Cancelling cruising speed

Use any one of the following methods to cancel the

set speed.

•

Push the <CANCEL> switch

➀

•

Tap the footbrake pedal.

•

Push the cruise control MAIN switch

➁

. The

indicator

➃

will turn off.

Starting and driving

5-41

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Renault ALASKAN 2017, Руководство водителя, Страница: 243 / 340

Результаты поиска

Содержание ALASKAN 2017

Отзывы: