Renault ALASKAN 2017 Скачать руководство пользователя страница 41

Страница: 41 / 340

5. Shorten the rigid attachment to have the child

restraint firmly tightened; press downward

➄

and rearward

➅

firmly in the centre of the child

restraint with your knee to compress the vehicle

seat cushion and seatback. Adjustable

seatbacks should be positioned to ensure full

contact between child restraint and seatback.

6. If the child restraint is equipped with a top tether

strap, route the top tether strap and secure the

tether strap to the tether anchor point. (See

“Child restraint anchorage (where fitted)” earlier

in this section.)
If the child restraint is equipped with other anti-

rotation devices such as support legs, use them

instead of (or together with) the top tether strap

following the child restraint manufacturer’s in-

structions.

7. Test the child restraint before you place the child

in it

➆

. Push the child restraint from side to side

and tug it forward to make sure that it is held

securely in place.

8. Check to make sure that the child restraint is

properly secured prior to each use. If the child

restraint is loose, repeat steps 1 through 7.

Rear-facing child restraints:
Be sure to follow the child restraint manufacturer’s

instructions for the proper use of your child restraint.

Follow these steps to install a rear-facing child re-

straint on the second row outboard seats using

ISOFIX:
1. Remove the head restraint on the seat.

2. Position the child restraint on the seat

➁

3. Secure the child restraint anchor attachments to

the ISOFIX lower anchors

➂

4. Shorten the rigid attachment to have the child

restraint firmly tightened. To compress the ve-

hicle seat cushion and seatback, firmly press

downward

➃

and rearward

4a in the centre of

the child restraint with your hand.
If there is any contact between the child restraint

and the front seat, slide the front seat forward

until contact no longer occurs.
If the child restraint is equipped with other anti-

rotation devices such as support legs, use them

following the child restraint manufacturer’s in-

structions.

NIC2413

Step 7

NPA1525

Step 2, and 3

NPA1409

Step 4

Safety — seats, seat belts and supplemental restraint system

1-23

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды

Renault ALASKAN 2017, Руководство водителя

Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды